Corima 45MCC 700C Tubeless Hooked Carbon Rear Road Wheel with Ceramic Bearings

The 45MCC carbon wheels are designed for demanding cyclists seeking lightweight and responsiveness. These wheels are ICONIC – lightweight, stiff and with a UNIQUE design! Their 100% carbon construction is a perfect blend of technology and expertise exclusive to CORIMA. Riding the MCC is a one-of-a-kind experience!

Features

• Our new 45MCC tubeless wheels in TC (tubeless hook) version feature an internal width of 22 mm and an external width of 28 mm, allowing for tires ranging from 25 to 34 mm.
• Optimized for 28 to 30 mm tires, they ensure unmatched performance and stability. Now 90g lighter, they offer ultimate versatility without compromising on efficiency. Their 100% carbon construction provides an exceptional stiffness-to-weight ratio and gives them a unique look. Specific and patented design.
• These wheels are entirely handcrafted, using only premium carbon fibers, with each carbon fiber carefully positioned to optimize power transfer.
• Disc brake wheels, with carbon spokes molded onto a CORIMA star-shaped hub (hub with ratchets).
• The 45MCC wheels feature a sleek and aesthetic design, with the rim finish in matte varnish revealing the 3K carbon fibers, and the matte black decals are placed under the varnish.

Specifications

• ETRTO 622 x 22TC (28") tubeless hooked front
• Shimano HG 11/12 speed; Campagnolo N3W; SRAM XDR 11/12/13 speed
• Profile : 45MM
• Rim width : 28mm
• Axle : Thru axle Ø12 x 100mm
• Weight : 625 g
• Carbon weave : Mat 3k
• Carbon Spokes : 12
• Ceramic Bearings

Shipped with

• Rim tape
• Protection wheelbag
• Valve TLR
• Valve nut tool

Additional Information

• 22TC (tubeless crochet) wheels can be fitted with 25 to 34 mm tires (ISO 5775).
• In tubeless setup, the use of Tubeless Ready tires is mandatory.
• With inner tube, any type of tire is allowed (TubeType or Tubeless Ready tire).
• The maximum inflation pressure is 7.5 bar (109 psi) for a 25 mm tire or 6.7 bar (97 psi) for a 28 mm.

Running tubeless tires requires specific care when it comes to installation and maintenance.

• When installing the tire, 2 layers of 0.1mm thick rim tape must be installed against the inner rim bed to ensure an airtight seal. (FTUB27-10 from Velox)
• When inflating, 12g CO2 cartridges limited to 6bar are allowed.
• CO2 cartridges higher than 12g, high flow pumps and compressors are prohibited.
• Use only plastic tire levers.